How To Clean Up A Wet Basement

The Time Is Now

flooded-basementThe tendency, among many homeowners, to postpone dealing with their wet basement issues is almost as widespread as the problem of wet basements itself. Even the mildest wet basement problems (mustiness or dampness) can cause more damage than you think and are bound to result in water damage to your belongings, your property or even your health. Water damage can also affect items stored on shelves in your damp basement because they will absorb the moisture in the air. For some of these items, water damage restoration may be a lengthy and costly process. Wet basement problems can range from a simple feeling of dampness to standing knee-deep in water Don’t procrastinate. Roll up your sleeves and address your wet basement issues now. If you have flooding in your basement, you’ll want to start water clean up right away.

Here Are Some Steps To Getting Your Basement Cleaned Up

1. If the water is spraying out of a broken pipe, turn off the water shut-off valve immediately.
2. Disconnect the main electrical switch, and only enter the basement when you know it is not an electrical hazard.
3. Contain water damage by getting as many possessions out of the basement as you can.
4. Try to get all the water out using a shop – vac. You can also install a sump pump in the basement floor to act as a floor drain and speed up water cleanup.
5. Use dehumidifiers to dry the air. Dry air will suck up the moisture from walls, carpets, furniture etc., reducing the amount of water damage restoration that you will need to do later.
6. Drilling 1’’ holes at the base of the walls allow dehumidifiers to draw out the humidity trapped behind the walls.
7. Throughout the water cleanup process, remember to keep the windows closed so that the dehumidifiers can dry out the air completely.
8. Cement is porous, and it will absorb water. To dry it out using a fan or a high-speed blower.
9. Try to complete water cleanup of your basement in under two or three days. You will have minimal water damage, and mold will not have had enough time to form.
10. If you do get mold, spray a fungicide directly on the affected area. Do not use chlorine bleach. While it will kill mold on most hard surfaces, it is too diluted to kill mold in the porous material.
11. Clean off dead surface mold using specialized cleaning products, and let surfaces dry completely. Wear rubber gloves, and if you have a health problem, use the services of professional mold remediation Austin

Find The Cause and Repair It

Once the initial water cleanup is done, determine the cause of the problem, assess the water damage, and decide what kind of water damage restoration you need. If condensation is behind your wet basement problem, consider one or more of the following solutions:
• Installing exhaust fans to draw out the damp air
• Insulating exposed pipes, duct works, and walls
• For relatively minor problems, proper ventilation may be enough. Make sure that air can circulate freely, especially on the walls. These measures will all reduce the need for water damage restoration in the future. Some leakage problems are simple to locate and fix (broken piping, washing machine overflow, while others are more complicated to diagnose and to repair (guttering problems, underground dry wells, substrate high water tables …). Solutions include controlling surface water, sealing the outside walls of your, and installing drain and pump systems. Ignoring daunting wet basement problems will only lead to more extensive water damage restoration needs (floors, walls, carpeting, fabric, documents etc.).